Showing results for 
Search instead for 
Do you mean 
Reply
dan Frequent Member
Frequent Member
Posts: 25
Registered: ‎04-03-2014

Image transfer % for each color

I have a 1000i and i've noticed that i get a face out on magenta but not Cyan, Yellow or Black on the trailing edge of the paper.  I have to adjust the Image Transfer % to compensate but that can ruin the smooth look in the center.  Could a more concise control of the Image transfer % for each color be designed? 

 

Thankyou,

 

Dan

Highlighted
Community Manager
Posts: 2,307
Registered: ‎07-21-2010

Re: Image transfer % for each color

Hi dan,

Thank you for using the Support Forum. Please take a look at this solution for Full Width Array and not the section on Automatic Density Uniformity Adjustment.  This may not be what you are looking for but I thought I would mention it.  I have escalated your suggestion. 

 

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!