Support Community
Showing results for 
Search instead for 
Do you mean 
New Member
Posts: 6
Registered: ‎12-09-2017
Accepted Solution

6515 fax to email


i am trying to set up fax to email on xerox 6515ND


i do not see an option to do this in the FAX setup app on the device webpage

Apps > Fax


software Current Version: 65.10.41


any help very welcome

Analyst Nation Moderator
Posts: 6,111
Registered: ‎11-25-2013

Re: 6515 fax to email

Fax forwarding is an oddity on these Versalink products.

Assuming Fax is working already, and email is working already, then the forwarding is handled at the printer itself.


First, login as the admin and then go to Device > Apps > Fax > Fax Forwarding and turn it on and give it an email to forward the faxes to.

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

New Member
Posts: 6
Registered: ‎12-09-2017

Re: 6515 fax to email

Hi Joe

Thanks for the answer.

Fax works and email works.

It's just that the option is not seen in the device setup menu...


is this a firmware issue?

Valued Advisor
Posts: 1,689
Registered: ‎10-11-2010

Re: 6515 fax to email

on some versalinks its only on the webinterface on some only on device itself :)

New Member
Posts: 6
Registered: ‎12-09-2017

Re: 6515 fax to email

[ Edited ]

ok i found it 

on the device after admin login


device > apps > fax > fax forwarding


New Member
Posts: 1
Registered: ‎03-14-2018

how do i pose a new topic

HI, I am new here. May i know how do i  post a new forum topic ? I couldnt fine any new poast button. 



Community Manager
Posts: 2,638
Registered: ‎07-21-2010

Re: how do i pose a new topic

Hi aaron_88

Thank you for using the Support Forum. Please go to the main screen at  Select the board you want to post in, click on the board title and then select New Message and type in your post.  Hope this helps. 


Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!