Showing results for 
Search instead for 
Do you mean 
Reply
New Member
Posts: 2
Registered: ‎08-31-2011
Accepted Solution

Remove xst file?

Hello, I'm using the WC 7556. I have set workflow scanning to scan to the network. Everytime I run a scan job, it sends a PDF file, but also sends a .XST file. Is there anyway to prevent the XST file from sending, or maybe send it to another location? 

Member
Posts: 12
Registered: ‎05-18-2011

Re: Remove xst file?

Yes.  That file is created by the job log.  To disable it, go to your Xerox’s IP address on the Internet and log on as admin.  Click on the Scan tab.  Choose your template or mailbox from the list.  Look for the section for report options, and disable job log.

New Member
Posts: 2
Registered: ‎08-31-2011

Re: Remove xst file?

Oh thanks! I was looking through the options and somehow missed this. 

Xerox Employee
Posts: 39
Registered: ‎10-04-2010

Re: Remove xst file?

Franuzz, did this resolve your issue?

Could you please post back and let us know and click on [Accept as Solution] so that it will be flagged and others will be able to find this post easily.

Thank you for participating in the forum.

TrishW-Xerox
Forums Moderator
New Member
Posts: 1
Registered: ‎01-10-2013

Re: Remove xst file?

When I disable the job log and click apply it says enabled.  I have a Workcenter 6400X and am logged in as the admin.  Any ideas?

Xerox Analyst
Posts: 234
Registered: ‎06-08-2012

Re: Remove xst file?

Hi deanjoly,

Try to use a different browser. If the problem persists then upgrade the firmware to the last available version in xerox.com.

Regards

Rui

 

 

 

 

Be sure to give out Kudos and select "Accept as Solution"
Agency Analyst
Posts: 488
Registered: ‎10-21-2010

Re: Remove xst file?

deanjoly,

 

Are you by chance using IE 7 or greater? Try utilizing the compatiblity view and see if that resolves your issue.

 

Thank you,
Jordan

If someone helped you make sure you give Kudos for their efforts! Don't forget to Select Accept as Solution if the reply resolved your issue as it will be able to help others!

Thank you,
Jordan R.
Systems Analyst / Consultant
Fiery Certified Professional

If someone helped you make sure you give Kudos for their efforts! Don't forget to Select Accept as Solution if the reply resolved your issue as it will be able to help others!
Highlighted
New Member
Posts: 1
Registered: ‎08-14-2017

Re: Remove xst file? WC 4265

On the  web interface page for the 4265 , go to Properties Tab, services, scan to Home, report options, Uncheck Box, save job log (xst) in repository.