Showing results for 
Search instead for 
Do you mean 
Reply
Highlighted
New Member
Posts: 1
Registered: ‎04-11-2017
Accepted Solution

Scanning to Destination Workcentre 7225

In order to use this feature do I have to change the Login Method to Validate on the Network?

Or should I be able to do this with the Login Method set to validate on the device?

 

I tried setting this up the other day using Workflow Scanning under one of the printer users and kept getting a login error. I used one of the support videos as reference. There is a button in the printer web interface to test the destination and it was disabled and said I needed to change the Login Method. This why I am asking. Today I plan to try and setup the Scan To feature, but thought I should maybe ask, as I really do not want to change the login method if I don't need to.

 

Thanks in advance for any assistance.

Analyst Nation Moderator
Posts: 4,786
Registered: ‎11-25-2013

Re: Scanning to Destination Workcentre 7225

You do not need to change the login method except to run the test destination thing.

 

Scan to is just done through the address boook, test it at the printer after creation or use the Remote control panel instead.

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe.