Recently I recieved a fault code "E4" on the fiery printer controller (X3eTY) for my Xerox docucolor 252 so I changed the fiery to another used one.
When starting up the printer with the "new" fiery printer controller the display on the printer shows fault code 127-213, which means there is a "RAP External Print IF Mismatch", according to the manual.
Is there a software issue in the "new" fiery printer controller? If so, how do I fix it? Does it require a Fiery CD to reload the software or can I download it from the internet?
The fault means they are incompatable. The cause will be one of 3 things.
The Fiery is not to a DC252
The Fiery is at a software version too new for the IOT (copier) firmware
The Fiery is at a version too low for the IOT firmware
Also, the 250 (DC240-DC250) was upgradeable to a 260 (DC242-DC252-DC260) In which case the copier will have a SN with VGW, and the Fiery could be version 6, or upgradedo 8, in which case the copier would have to be running a firmware that would not work with a System 6 Fiery any longer.
Prefix Model VGW DC240-250 DUX DC260 DRB DC242-252 WUP EFI bustle (non-RoHS)X AXA EFI bustle (RoHS)X WYM EFI Fiery standalone EXP250 (non-RoHS)X BMK EFI Fiery standalone EXP250 (RoHS)X ERB EFI bustle DFE (RoHS) XX EEA EFI Fiery standalone EX260 (RoHS) XX
The X3eTY is not necessarily to a Xerox at all, Konica Minolta had at least one machine with it
Xerox had it on the 240 and the 260 family running entirely different softwares
The Fiery needs a CD to be reloaded, as far as I know it cannot be downloaded legally.
Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!