Support Community
Showing results for 
Search instead for 
Do you mean 
Reply
Highlighted
Member
Posts: 16
Registered: ‎11-09-2016
Accepted Solution

Will 8R12941 refill work with 8R13177 cartridge?

I can't seem to find any information for the refill of 8R13177. I would like to know if 8R12941 will work as a refill. If not, is there a refill part # or do I need to order a whole new cartridge? Thanks.

Xerox Employee
Posts: 11
Registered: ‎11-12-2010

Re: Will 8R12941 refill work with 8R13177 cartridge?

Hello,

 

I've had a dig around and found information that indicates 8R12941 is a refill for 8R13177 (used with WorkCentre 7970 and Xerox Colour C60/C70 BR Booklet Maker finisher).

 

BR Booklet Maker Finisher

8R13177 Staple Cartridge (1 cartridge with 5000 staples)

8R12941 Refill for 8R13177 (3 refills, each refill contains 5000 staples)

 

 

New Member
Posts: 1
Registered: ‎05-14-2018

Re: Will 8R12941 refill work with 8R13177 cartridge?

nrbristow,

 

Did you find intruction on how to replace 8R13177 with the cartridge 8R12941

 

miket58

Member
Posts: 16
Registered: ‎11-09-2016

Re: Will 8R12941 refill work with 8R13177 cartridge?

I did not find Instructions, just confirmation that the part can be used as a refill.

Analyst Nation Moderator
Posts: 6,014
Registered: ‎11-25-2013

Re: Will 8R12941 refill work with 8R13177 cartridge?

Stick a pin in here to release the clip

2.JPG

 

Squeeze these two spots and lift at the same time as the pin in the above

 

1.JPG

 

Lift out of the carriage

 

3.JPG

 

Put in the replacement cartridge by simply setting it in at an angle as seen in the last picture, it will sit right into the spot and lock into place.

 

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe.