Showing results for 
Search instead for 
Do you mean 
Reply
New Member
Posts: 1
Registered: ‎03-30-2017

Phaser 6600 Tray 1 will not feed, paper jam error tray 1

I have a phaser 6600 that will not feed paper from tray 1.  It will try then stop, diplaying an error for "Paper jam tray 1).  I have checked all the paths in the printer and they are all free and clear.  There was no initial jam, just printing fine then to this.

 

Is it possible one of the paper feed motors could be non functional and give this error?

Highlighted
Community Manager
Posts: 2,548
Registered: ‎07-21-2010

Re: Phaser 6600 Tray 1 will not feed, paper jam error tray 1

Hi dcoggins,

Thank you for using the Support Forum. Please make sure you are following all the steps for clearing the jam from Tray 1.  Also make sure you are using paper that is within specifications for your machine.  If the paper is within specs. then check the feed roller and clean it or change it if cleaning it does not help.  If this does not fix the issue please consider contacting your local support centre

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!