Showing results for 
Search instead for 
Do you mean 
Reply
Member
Posts: 10
Registered: ‎11-29-2016

Xerox Colorqube 9203 Media Path Driver PWB Error 099-285

Hi, 

 

I received the error above and think it may have resulted from connecting a VGA monitor to the 15 pin output on the rear of the copier.

 

In any event, the manual indicates that Fuse C on the Media Path Driver PWB is open.  Where is this fuse located and what is it's rating?

 

I'll be checking for shorts, etc., but think it was the error of plugging in a monitor to what is not a monitor connection.


Please let me know.  If anyone has made this repair by replacing the SMB fuse, please let me know if you have any tips.


Thanks

Member
Posts: 10
Registered: ‎11-29-2016

Re: Xerox Colorqube 9203 Media Path Driver PWB Error 099-285

I identified the blown fuse as F801 on the Media Path Driver PWB.  Please let me know if you know the rating for the fuse in the pic below so that I can order a replacement.

 

Thank you.IMG_4519sm.JPG