Showing results for 
Search instead for 
Do you mean 
Reply
Member
Posts: 11
Registered: ‎05-17-2016

Banding versant 80

Hi i have attached few pictures to show my problem.

 

Versant 80.

 

350gsm/manual duplex - claro silk  - paper type: coated. I did try matte,cast and also uncoated but this only made the banding worse.

 

Im printing a "solid" blue colour. which is made up of cyan magenta and yellow.

 

It seems to be having issues with banding/lines running through it opposite the feed direction.

 

Please see first image.

 

Printing

 

I ran the seperations and saw cyan has an issue with this bands magneta not so much (yellow and black were sufficient quality.I decided to replace the cyan drum with a new one and ran the separation again. but it still had this banding.

 

Please see image left is before drum change right is after.

 

before and after drum change copy.jpg

 

Can anyone shed some light on this issue? 

 

We have a great history with  "thump" marking because of which we have had an impulse banding kit attached, which has slightly improved things. 

Highlighted
Community Manager
Posts: 2,559
Registered: ‎07-21-2010

Re: Banding versant 80

Hi versant80junior,

Thank you for using the Support Forum. Have you tried cleaning the fuser assembly?  Please take a look at the solutions for banding.  If none of these help please consider contacting your support centre for further assistance.

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!