Showing results for 
Search instead for 
Do you mean 
Reply
Valued Advisor
Posts: 1,638
Registered: ‎10-11-2010

Re: Banner sheet

yes, open up the driver properties, then goto the port tab, then click on configure port

DFM New Member
New Member
Posts: 4
Registered: ‎02-15-2012

Re: Banner sheet

It would be much simpler for Xerox to NOT put this in the print drivers as a default. Out of over 3,500 customers, I had 1 that wanted banner sheets. I am not sure why they are ON to begin with. Customers do not want to pay for this sheet.

Valued Advisor
Posts: 1,638
Registered: ‎10-11-2010

Re: Banner sheet

yes i know :)

 

therefore you can make predefined drivers and give that driver to your customer...

 

 

Remote Technical Support User
Posts: 11
Registered: ‎01-20-2012

Re: Banner sheet

[ Edited ]

It looks like you are trying to disable the banner sheets.

 

If this is the case, please try the following:

  • Open a web browser and enter the IP address of the machine in the address field.
  • Click the Properties tab
  • in the left menu, click the Services section, followed by Printing.
  • Click the General link
  • in the Banner Page section, ensure that Print Banner Pages and Allow the Print Driver to Override is set to No.

If they are already set this way, it is a bug in the settings.  Click Yes in both, click Apply and then click No in both and click Apply again.

I hope this helps.

New Member
Posts: 5
Registered: ‎10-03-2012

Re: Banner sheet

I have the same issue tried all the suggestions and the driver defaults back all the time to print ID on the banner page.

 

The printer is set as this:

 

Print Banner Sheets
 Yes
No
 
Allow the Print Driver to Override
 Yes
No
 
I tried the trick to put both to yes and then no, no luck
This happened just after we upgarded the firmware
Community Manager
Posts: 2,548
Registered: ‎07-21-2010

Re: Banner sheet

Hi Thomas,

Please let us know what machine you are using that will make a difference as to what you can do/try to correct the problem. 

 

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

New Member
Posts: 5
Registered: ‎10-03-2012

Re: Banner sheet

Hi Cheryl,

 

This is a Xerox WorkCentre 7545 v1 Multifunction System

It started happening 2 days ago just after the printer rebooted following a software update to Version: 061.121.227.03404

Highlighted
Valued Advisor
Posts: 1,638
Registered: ‎10-11-2010

Re: Banner sheet

hi, in some firmwares it was bug

 

on the webinterface of the machine, turn on banner , apply that setting, turn off again

makes no sense what i wrote, but its a bug, so the setting is saved again ...