Support Community
Showing results for 
Search instead for 
Do you mean 
Reply
Member
Posts: 12
Registered: ‎12-17-2014

PHaser 7500 Solid lines affecting Cyan and Black

Our Xerox 7500 is printing 'lines' or streaks in cyan and black. (see photos)

 

We already followed the printing problem suggestions and cleaned the imaging units using the wand.

 

We replaced the CYAN imaging unit today, no change.

 

We replaced the Cyan toner today. This didn't fix the issue either.

 

We replaced the fuser / belt cleaner assembly in January and according to the machine, we still have 90% life left.

 

The transfer roller still has 40% life left, I don't think I've ever replaced this in the machine.

 

The unit has 85000 prints on it.

 

Any help would be MUCH appreciated. Thanks.

 

 

 

photo 2.jpg

 

 

photo 3.jpg

Analyst Nation Moderator
Posts: 5,889
Registered: ‎11-25-2013

Re: PHaser 7500 Solid lines affecting Cyan and Black

Where it affects all colors it can't be a drum, if it was the belt, it wouldn't repeat so closely, it is most likely to be the transfer roller.

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe.
Frequent Member
Posts: 24
Registered: ‎02-19-2018

Re: PHaser 7500 Solid lines affecting Cyan and Black

Hi,

From my experience, you shoud replace LPH (Led Print Head) for affected colors. Of course you need a tech.

Member
Posts: 12
Registered: ‎12-17-2014

Re: PHaser 7500 Solid lines affecting Cyan and Black

Hey thanks! that's interesting. But we need to have the tech do this for us?

Member
Posts: 12
Registered: ‎12-17-2014

Re: PHaser 7500 Solid lines affecting Cyan and Black

Frequent Member
Posts: 24
Registered: ‎02-19-2018

Re: PHaser 7500 Solid lines affecting Cyan and Black

Hi,

Yes, because are some parts that need to be disassemble: front cover, one plate that hold the dispensers, ATC PWB, to raise the dispensers for affected colors, the developer plate, developer housing and at the end the LED PRINT HEAD. If you have a SM and if you are a skilled man it is not so hard to do it. Otherwise you need a tech.

Good luck!

Highlighted
Frequent Member
Posts: 24
Registered: ‎02-19-2018

Re: PHaser 7500 Solid lines affecting Cyan and Black

No. The LED PRINT HEAD have p.n. 130K72653.

Member
Posts: 12
Registered: ‎12-17-2014

Re: PHaser 7500 Solid lines affecting Cyan and Black

[ Edited ]

Thank you for the quick reply.

 

We let our service agreement with Xerox lapse for this machine. Can this installment be handled by a local service shop? There are two here in Rhode Island that I can think of that repair Xerox units.

Or do you recommend a XEROX rep handle this?

Jason

Frequent Member
Posts: 24
Registered: ‎02-19-2018

Re: PHaser 7500 Solid lines affecting Cyan and Black

I recommend you a Xerox rep.

 

All the best for you!

Gabi