Support Community
Showing results for 
Search instead for 
Do you mean 
Reply
New Member
Posts: 4
Registered: ‎03-24-2018
Accepted Solution

Repeating marks on Xerox phaser 7500

Hello I am having repeating marks problem. I have put in a new fuser but it didn’t help. Please help me. Greetings 

F1E70DFA-D950-4F1F-996C-61FF5821A4CA.jpegC1940A3A-F10A-43BB-9DC8-334D86EBCBAD.jpeg

New Member
Posts: 2
Registered: ‎03-23-2018

Re: Repeating marks on Xerox phaser 7500

If it isn't the fuser. Likely the transfer belt. Easy enough to pop out and che k it for marks/streaks on there. The wiper blade probably has a lot of paper lint debris on it causing it not to clean the belt after the last job and some old residue comes back out on the belt and onto the new print. Residue is supposed to be cleaned off then an auger moves it to the waste toner bottle. 

New Member
Posts: 4
Registered: ‎03-24-2018

Re: Repeating marks on Xerox phaser 7500

Thank you for answering. You are right about the residue on the belt. The small marks on the paper are identical to the marks on the belt. But I have tried to clean the wiper blade with no results. I have a theory that it cold be residue on the rollers inside the transfer belt - could that be possible?
New Member
Posts: 2
Registered: ‎03-18-2018

Re: Repeating marks on Xerox phaser 7500

It would be worth checking your individual imaging drums for any signs of defects.

Highlighted
Frequent Member
Posts: 24
Registered: ‎02-19-2018

Re: Repeating marks on Xerox phaser 7500

Hi,

 

The debris are inside the IBT assy, so you need a tech to disassembly and clean the IBT or replace it.

New Member
Posts: 4
Registered: ‎03-24-2018

Re: Repeating marks on Xerox phaser 7500

Hi Gabiene,
You’re right it is the problem. I took the ITB out and removed some small debris on the rollers and it helped.
Thanks