Showing results for 
Search instead for 
Do you mean 
Reply
New Member
Posts: 1
Registered: ‎07-14-2017

Versant 80 "pinching" wider stocks

Yesterday my Versant 80 has begun to, what looks like, pinch my wider papers. I can run 8.5x11 LEF and it doesnt do anything but if I run 11x17 or larger it pinches the leading edge, as pictured. Heaver weight stocks come through looking fine, but I can feel a little bump where the pinch would have occured.

 

Ive opened all the front panels and did my best to trace through the paper path to see if there were any blockages. Ive also tried printing from four different trays, fanning and flipping the paper, and blowing out any spots that I would think this could occur.

 

Any ideas?

 

Community Manager
Posts: 2,548
Registered: ‎07-21-2010

Re: Versant 80 "pinching" wider stocks

Hi SignUp,

Thank you for using the Support Forum. Please make sure you are using paper that is within the specifications of the machine and that the tray properties are set correctly.  Please see the solutions for wrinkled paper.  If the problem continues please consider contacting your support centre for further assistance.

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

Occasional Advisor
Posts: 298
Registered: ‎02-13-2013

Re: Versant 80 "pinching" wider stocks

It looks like its time for some fuser maintenance by a tech.