Showing results for 
Search instead for 
Do you mean 
Reply
Highlighted
New Member
Posts: 1
Registered: ‎02-17-2015
Accepted Solution

Xerox 3315 how to disable test page printing on startup

Hello, I have a Xerox workcentre 3315 that prints a test page each time I power on the printer. How can I disable it? Many thanks

Community Manager
Posts: 2,509
Registered: ‎07-21-2010

Re: Xerox 3315 how to disable test page printing on startup

Hi LadyBugs,

Thank you for using the Support Forum. Please follow these instructions to turn off the Configuration page at start up:

Enable or Disable Configuration Page at Start Up

  1. Press the [Machine Status] button on the Control Panel.
  2. Press the [Up] or [Down] arrow button until "System Setup" is selected, and then press the [OK] button.

    NOTE: If prompted, enter the Administrator password. The default password is "1111".

  3. Press the [Up] or [Down] arrow button until "Machine Setup" is displayed, and then press the [OK] button.
  4. Press the [Up] or [Down] arrow button until "Configuration Page" is displayed, and then press the [OK] button.
  5. Select "On" (enabled) or "Off" (disabled) , and then press the [OK] button.
  6. Press the [Stop] button to return to Ready mode.

If this does not resolve the issue please consider contacting your support centre for further assistance.

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

New Member
Posts: 1
Registered: ‎04-19-2017

Re: Xerox 3315 how to disable test page printing on startup

Thanks, the same technique works for 3215