Showing results for 
Search instead for 
Do you mean 
Reply
New Member
Posts: 5
Registered: ‎09-19-2015
Accepted Solution

xerox 6605 wide format cd instaler /recovery

hello every one .... i just wanna ask about the instruction of using cd (installer/recovery) step by step .....please ..i will be grateful

 

original.jpg

Analyst Nation Moderator
Posts: 5,213
Registered: ‎11-25-2013

Re: xerox 6605 wide format cd instaler /recovery

I don't believe there are step by step results beyond

 

1. Put disk in CD-ROM

2. Reboot

3. Follow the step by step instructions on the screen

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe.
Highlighted
New Member
Posts: 5
Registered: ‎09-19-2015

Re: xerox 6605 wide format cd instaler /recovery

actually this does not work perfectly i will tell you the real steps on my xerox 6605 wide format with dell controller :

1- put the CD in the dell controller
2- reboot and press F12 you will get to the boot screen

3- now choose booting from CD-ROM ( you will see the instruction that u should flow to instal your flow accxes linux firmware)
4- put the password "ACCXES" to start the operation of installation.

5- after about 10 min the controller will be eject the cd automatically that's mean the installation succeed

6- now this one step is the problem the system will reboot after you eject the CD ...but nothing happens after that .......black screen and a dead printer what should i do .....some one tell me that i must wait for one hour to get into the free flow accxes screen .

i really did it Once i mean i I have successfully installed it and it worked well  But now I forgot some important steps ....i cant remember it 

by the way i have many cd's like karnel source & system firmware & os install /recovery 

New Member
Posts: 5
Registered: ‎09-19-2015

Re: xerox 6605 wide format cd instaler /recovery

finnly i found the soulotion affter do all those steps :

1- put the CD in the dell controller
2- reboot and press F12 you will get to the boot screen

3- now choose booting from CD-ROM ( you will see the instruction that u should flow to instal your flow accxes linux firmware)
4- put the password "ACCXES" to start the operation of installation.

5- after about 10 min the controller will be eject the cd automatically that's mean the installation succeed

** now you have to connect the xerox 6605 wide format with your network connection & you configurate the ip adress like it appare in the image below 

Capture.JPG

 

after that go to the browser and type this ip address 13.240.20.38 you will get this page :

 

Capture00001.JPG

 

now go to the :Utilities/Upload 

 

Capture456.JPG

now you have to download the firmware Controller Files in my case it called : FRX_LVX_UXC_6604_6605_14_0b142.disk version 14.0

 

Capture546.JPG

 

 

after you press on upload the machine will reboot and everything will be okay and the printer will start ............this is all