06-15-2017 09:09 AM
Can not access the web control panel.
Administrator password 1111, entering the system administrator mode is opened on the printer.
When you enter the web admin and password 1111 error
-Switch the machine Off and then On for System Administrator login.
Please tell me how to access the web, if the login and password are correct in the system administrator mode on the printer.
06-15-2017 10:22 AM
If somebody failed to login 3+ times it will lock you out until rebooted.
If your browser cache is causing it (Chrome is bad for this) you should be able to hold the CTRL key when you enter the admin credentials to eliminate the cache (Try SHIFT if CTRL fails)
Worst case scenario is "use a different browser"
There is no different login from the control panel or the web page, both are identical, so if it works at one, it has to work on the other.
06-26-2017 12:10 PM
Have a tech wipe the machine.
By default, the pass code is 1111 not 111
But if you changed it, and it works on the IOT as just 111 then it has to work on the web because the same credentials are used.
If it doesn't work, it is broken in a way that Xerox has never had reported and the only recourse is to wipe the device and start over.
06-27-2017 05:32 PM
06-27-2017 05:42 PM
Have a tech wipe the machine, if you can't access it as the admin you cannot change the password for very obvious security reasons.
4 weeks ago
Do you think my problem is solved?
I don't think or know anything about you or your printer, I am near certain you didn't follow my last post and get thje machine wiped by service, so I can only assume it isn't fixed since you are posting again, but you posting again does not change the fact that if you can't login, you can't fix it, so until you get someone to wipe the machine completely to restore the default admin credentials, there is nothing more to do.
How do you see the solutions to the problem?
Read my last post
The video clearly shows my problem.
Your problem isn't being contested, you can't login, we can't help with that