Showing results for 
Search instead for 
Do you mean 
Reply
Highlighted
New Member
Posts: 7
Registered: ‎08-26-2016
Accepted Solution

Changing Time zone with SNMP

Somebody knows how to change the time zone on Workcenter (say 7855) using SNMP?

I found where to read the value but it's a read only field. What would be the OID value to use?

Several machines to modify so it would help not doing it by hand.

Thanks,

Community Manager
Posts: 2,425
Registered: ‎07-21-2010

Re: Changing Time zone with SNMP

Hi DanPic,

Thank you for using the Support Forum. Please take a look at this customer tip for changing the date and time via snmp.  If this document does not have what you need please consider contacting your support centre for further assistance.

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

New Member
Posts: 7
Registered: ‎08-26-2016

Re: Changing Time zone with SNMP

Hi CherylO,

This is exaclty what I need.

While we are on the subject, do you have some sort of repository of SNMP related apps paper like this one?

 

Thanks again, this will be very helpful

Community Manager
Posts: 2,425
Registered: ‎07-21-2010

Re: Changing Time zone with SNMP

Hi DanPic,

I am glad that document helped.  There is a Customer Tips site.  Be aware that it is updated infrequently but the information there will sometimes work for other models or families of machines if you do not see your model listed.  . 

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!