Showing results for 
Search instead for 
Do you mean 
Reply
MPS NextGen User
Posts: 8
Registered: ‎09-06-2011

Equitrac and TWN4 card readers

[ Edited ]

I have a customer who had 2 machines delivered with the embedded card readers, which is fine however they need to be programed for their ID cards. is there a way that i can program the card readers without having a technician come out and uninstall the readers then reinstall once i have programed them?

Pete Ellwanger
412-861-6545
Xerox Employee
Posts: 293
Registered: ‎01-19-2011

Re: Equitrac and TWN4 card readers

Peter, if you have access to the USB end of the CR, than you should be able to connect it to a PC and configure the CR. Otherwise, if the CR are integrated, you might need to disemble the panel to reach the CR usb end. Look up for me on the internal address book if you need more details.

Please select Accept as Solution if you feel this post has helped you.
Highlighted
MPS NextGen User
Posts: 8
Registered: ‎09-06-2011

Re: Equitrac and TWN4 card readers

It is integrated making access to the USB not availble. I just thought maybe there was an outside chance that somehow the card reader could be accessed by one of the USB ports on the machine (front or back) but with the cable i made with Male A to male A it did not work. So i have scheduled a technician to go and uninstall the card readers so i can program them. He will just have to go back and reinstall the readers again.

 

thanks for your reply

Pete Ellwanger
412-861-6545