08-30-2017 06:16 PM
I'm new in this Forum; I have an ISSUE with my Xerox WorkCentre 3615. I Enabled Administrator Login in my MFP & set a User Name & Password then click on Save, after that I can't login, it's asking my for Authentication, I place my User & Password but it said "Power Off / On the printer to login as System Administrator" I powered off the machine but continue with the same ERROR.
Any help please, thank you.
09-01-2017 07:30 PM
Thank you for using the Support Forum. please take a look at the solution for resetting the network setting and see if this will help with the error you are seeing. If this does not help please consider contacting your support centre for further assistance.
10-05-2017 03:54 PM - edited 10-05-2017 03:56 PM
Hi CheryI0, thanks for your replay but, I'm not clear here, you recommended me to "Reset the Network Settings", this is the solution for the issue I have with "Admin Login"? on XEROX WorkCentre 3615 MFP, Win 7 Pro machine. Please can you help me?
10-05-2017 05:52 PM
If the machine is not taking your username and password or the default values which are username admin and the password left blank, then you are locked out and you need to reset so that you can access the settings and try again.
10-06-2017 12:37 PM
Her first response here was a direct link to the directions, just click the link
10-06-2017 01:25 PM
10-10-2017 04:55 PM
Thanks LouiseMiller, still waiting for more info about the solution of this issue, a little confuse because the solution I have from the forum is to "Reset Network Settings" & I'm asking for "Administrator Login" Reset, if this is the solution I'm waiting for someone to confirm me it, I already asked; just trying to go deeply to ensure not to have an additional problem with the machine, either way I'll thanks any subjections & help as always do. Thanks Forumers!!!
04-20-2018 10:14 AM
I know this is an old post, but since the original poster never received a correct response to the problem, and I'm in need of the same info, I figured I'd just re-open this one. I have a WC 3615 that the default admin password isn't working on. The user claims they never changed it, and now they want settings updated which are inaccessible without first logging in as admin. Can someone please tell me how I can RESET THE ADMIN LOGIN if the password has been lost? Is this something I'd need to access NVM settings to do?