Hi Tammy - thanks for your reply but the link (for me anyay) jsut point to an advert for a
So doesn't really help me I am afarid. Could you tell me how to clean the scnning unit?
I am in England so there is no local Xerox service here.
Mike, Frank, and Tammy,
I am having the same problem, starting a few days ago (see first attached picture). When using the automatic document feeder and two-sided scanning, the second side shows a large black and grey vertical line.
I called customer support (here in Germany), and they gave me a quote for a flat-rate repair which is 30% more expensive than the total cost of the printer when I bought it ;(
I also looked up the service manual where under GP34 I found instructions on how to clean the second-side scanner (see the last attached picture). I guess this is what Tammy may have referred to, but the link does not work for me. Maybe the instructions can be of help to someone.
As for me, I checked that there is neither dirt nor obstructions in the document feeder nor in the second-side scanning unit (see the second and third attached pictures). Any tips how to proceed further?
In the mean time I will try to get the seller to exchange the device (it is within the legal warranty of 2 years which holds for products in Germany).
I found this article for lines or bands when scanning/copying 2-sides only, it has steps for cleaning. If you are still having issues after trying these steps, I suggest that you call into our support department for assistance @ 1-800-821-2797 or 1-800-835-6100
I am afraid not. Nobody replied from Xerox. So no solution at present.
I have the same issue.
Do you already know what the solution is?
I have WorkCentre 6515 and it has worked fine for 1 year. Now when I scan/copy 2 sided - the second side has a large 2" thick black line running all the way down the left hand side. This does not happen when I print 2 sided. Only when I scan or copy. When I scan or copy 1 sided it works fine. So it is only ever 2 sided that I have an issue. Problem is this is why I bought the machine - to scan double sides in one pass. It is a function I use all the time so it is a big problem fo rme.
I am guessing must be someing to do with the scanning unit in some way (as that will have nothing to do with printing) but have no idea what.
Any help much appreciated.