cancel
Showing results for 
Search instead for 
Did you mean: 
mmorrow Member
Member

550 Stored programming

Customer has a 550 with no Fiery.  They want to use stored programming on the device.  It looks like it should work, but it doesn't. 

 

To create stored programming, I'm going to Machine status/tools/Stored Programming.  At that point there's a choice for "Store" or "Store Build Job".  I select Store, an available slot, and then create copy settings.  I give new stored programming a name.

 

Then I go to Copy function, job assembly screen.  Stored programming button remains unavailable.  When you click, it says "The Stored programming for Build Job will only take effect from the second job segment."  That would make sense if I was trying to use Stored Build Job programming, but I'm not.

 

Any ideas?  Has anyone made it work?

0 Kudos
5 Replies
Community Manager CherylO-Xerox
Community Manager

Re: 550 Stored programming

Hi mmorrow,

Thank you for using the Support Forum.  Please take a look at this solution for saving and retrieving copy settings and see if this will work for you.  If this is not what you are looking for or if it does not work you might need to contact your local support centre. 

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

0 Kudos
Highlighted
mmorrow Member
Member

Re: 550 Stored programming

That solution doesn't work and appears to have been created for a different machine.  The 550/560 do NOT have "save current settings" and "retrieve current settings" choices on the job assembly screen.  They have a "stored programming" choice. 

0 Kudos
Vertech New Member
New Member

Re: 550 Stored programming

I realize this thread is a little old, but we have a new 560 that has the same issue.  There is not an option to save settings as described in the user manual or by the link mentioned above.  Could someone from Xerox please address this?

 

Thanks.

0 Kudos
Kimzi Valued Advisor
Valued Advisor

Re: 550 Stored programming

There is a new solution for this --> Here

 

If the link does not work try going to the Support page: Here

 

and search for:

How To Save, Name, and Retrieve Stored Programming Settings

 

Hope this helps!

 

Thanks

0 Kudos
Vertech New Member
New Member

Re: 550 Stored programming

Thanks for your reply. The new solution link you posted did work for me with one exception. The "Stored Programming" button was not available on my "Services Home" page. I was able to figure out how to add it and once I did, all worked fine on retrieving my stored programming. In case anyone else runs across this same issue, you can add the "Stored Programming" button to your "Services Home" screen by going to "Machine Status", "Tools", "Systems Settings", "Common Service Settings", and select "Screen/Button Settings". On the Screen/Button Settings page, select (highlight) "Services Home" and hit the "Change Settings" button. That is where you can add the Stored Programming button to your Services Home page. Just something worth noting. There are 2 different Stored Programming options on these copiers. One is for the "Build a Job" function under copying which is not what I am referring to here. The other is just for storing preconfigured machine settings, which I use for custom copy settings, but I assume you could use for other machine functions as well. Thanks for your help!
0 Kudos