cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
enea Contributor
Contributor

7232 FAX - ecm and speed dial

Jump to solution

Hi all,

I need to disable ecm and setting speed dial to 9600.

Has someone the NVRam code and the parameter to set those?

 

0 Kudos
2 Replies
Community Manager CherylO-Xerox
Community Manager

Re: 7232 FAX - ecm and speed dial

Jump to solution

Hi enea,

Thank you for using the Support Forum. I don't have that informtion you will need to contact your technician to get information on how to turn off the ECM and change the fax speed. 

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

0 Kudos
enea Contributor
Contributor

Re: 7232 FAX - ecm and speed dial

Jump to solution

I've found it:

 

ECM Ability: 825-159 (1 Enable 0 Disable)

Reducing the transmitting or receiving baud rate from 33.6K bps to 14.4K or 9600 bps by changing NVM locations:

NVM Values: 1 = 33,600 9 = 14,400 11 = 9600

  1. Sending NVM 825-239 "T30MaxSpeedL1Tx" (single line)
  2. Sending NVM 825-240 "T30MaxSpeedL2Tx" (For 2 line fax)
  3. Receive NVM 825-221 "T30MaxSpeedL1Rx" (single line)
  4. Receive NVM 825-222 "T30MaxSpeedL2Rx" (for 2 line fax)

Bye.

0 Kudos