I need to disable ecm and setting speed dial to 9600.
Has someone the NVRam code and the parameter to set those?
Solved! Go to Solution.
Thank you for using the Support Forum. I don't have that informtion you will need to contact your technician to get information on how to turn off the ECM and change the fax speed.
I've found it:
ECM Ability: 825-159 (1 Enable 0 Disable)
Reducing the transmitting or receiving baud rate from 33.6K bps to 14.4K or 9600 bps by changing NVM locations:
NVM Values: 1 = 33,600 9 = 14,400 11 = 9600