7845 Workflow scan via SMB

[Fabio]

there is a new SPAR release firmware out containing SMB fixes

this will fix your issue

[Adam101912-ASP]

Make sure you have a domain set in the machine. Also 139 is for XP 445 Vista or later.

[CherylO-Xerox]

Hi Mike,
The image is now visible.

[RichardG01273-GIS]

[RichardG01273-GIS]

I tried port 445, no luck. I tried scanning to the root folder only, no luck. I've put the domain name in front of the user name, lpandt\Scan Docs, no luck. I created a new user and password, no change. All the other xerox machines (6) are scanning just fine with the credentials they are using for the 7845, just can't get the 7845 to work. The other machines are 7345 and 7120.

[CherylO-Xerox]

Hi reverhart,

Thank you for using the Support Forum. Please take a look at the solutions for SMB Scanning Fails with Login Error and make sure you have tried all the solutions suggested.  If this does not help lease consider contacting your support centre for further assistance.

[RichardG01273-GIS]

I'm having the same difficulty. When I loaded the smbclient patch, it wouldn't show on configuration page until I powered machine off and then on again. It still doesn't scan. Anyone with ideas?