Ho lo stesso problema con una Xerox 9201 e 9202
dove prendo il firmware nuovo ???? Sul vostro sito è del 2010 !??!!? un po vecchio.
Grazie
Claudio
Devi controllare se il firmware attuale:
è 061.080.xxx.xxxxx installa:
se è 061.050.xxx.xxxxx installa:
Queste sono comunque SPAR e l'installazione è consigliata da parte di un'analista di un concessionario Xerox o un tecnico Xerox.
Ciao Enea
sono Claudio di SODIP. Ho questo problema devo spsotare le cartelle di scansione su un nuovo server Windows 2012 R2 ed mi da l'errore come quello aperto nel topic.
Penso che la Sig,ra Bellebono farà un chiamata per risolvere il problema. Se basta installare il nuovo firmware siamo a posto....
Sento se la sig.ra Bellebono ha già aperto la chiamata
Grazi e ciao ciao
Sentiamoci, te lo vengo a fare io. :smileyhappy:
I translate for all the lastes post!
- malu9397 write:
I've the same problem with Xerox 9201 and 9202
Where can I download the new FW??? On the site the last is 2010, it's old.
thanks
Claudio
- enea write:
You need to chek the actual firmware:
if it's 061.080.xxx.xxxxx, you can install:
http://www.support.xerox.com/support/colorqube-9201-9202-9203/file-download/itit.html?contentId=1117...
if it's 061.050.xxx.xxxxx, you can install:
http://www.support.xerox.com/support/colorqube-9201-9202-9203/file-download/itit.html?contentId=1023...
That version are SPAR and the installation is recommended by a Xerox CCSS analyst or a Xerox Technical
- malu9397 write:
Hi Enea,
I'm Claudio customer SODIP.
I have this problem: I need to move scan folders on a new Windows 2012 R2 server and it gives me the error like the one in the topic.
I think the Sig, ra Bellebono will make a call to solve the problem. If you just install the new firmware we'll get it ....
I feel if Ms Bellebono has already opened the call
Thanks and bye bye.
- enea write:
Call me, I come to do ;-)
Hi Davinchee,
this is the last FW of CQ: http://www.support.xerox.com/support/colorqube-9300-series/file-download/itit.html?contentId=117325
But the best solution is: upgrade the CQ 930x to connectkey, and after install the last CQ FW:
http://www.support.xerox.com/support/colorqube-9300-series/file-download/enus.html?contentId=126208
Bye.
Dear Mr. Mark:
I am Praveen from DXB. I tried a lot to solve this issue of Remote Directory Lock Failed. I had contacted Service Engineer in DXB here in Xerox but invain. They said they dont have the SMB 3.2 Version. If you have that small file. Coudl you please email me (fclchemdxb@gmail.com) God bless you man. Thanks, Praveen.