Showing results for 
Search instead for 
Did you mean: 
1 Reply
Joe Arseneau
Valued Advisor
Valued Advisor

Re: Blank Copies

Pretty much has to be environmental, have the power outlet checked. If the B80XX had that issue this forum would be absolutely full of complaints about it and the Xerox support line would be getting absolutely hammered for the last 1.5 years with calls.

So if you have 2 different machines with the same issue that only occurs after a period of time, it pretty much has to be a power fluctuation cooking something in it. Especially since the 2nd replaced the first, which implies it was put in the same spot as the first that had the issue.

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau
New Member
New Member

Blank Copies

Product Name: AltaLink B8045 / B8055 / B8065 / B8075 / B8090 Multifunction Printer
Operating System: Other – specify OS in post

We have a B8055 that when making copies off the glass or from the df, they are blank. Prints are good. The solution has been to cycle the power. Once that is done, it works. The dealer has replaced the whole scanner, main board and finally swapped out machine with same model. Well now this loaner one is doing the same thing. Had Canon before with no issues. We have 3 othe Xerox models and the B8055 is the only one doing this. Any ideas?

0 Kudos