cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Member
Member

C70 with integrated fiery

working on a C-70, everything seems configured well,but except that i dont see the firey icon on the UI and on the webtool page it shows "Printing: Check scanner network cable" also when you try to reach the printer page via webtool it say"

Service Temporarily Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Any help please?

0 Kudos
2 Replies
Highlighted
Valued Advisor
Valued Advisor

Re: C70 with integrated fiery

LAN cable from IOT to Fiery needs to be a crossover.

 

IOT NIC needs to be either DHCP/AutoIP (Vastly preferred) or Static assigned as

Machine Status > Tools > Connectivity and Network Setup > Protocol Settings > TCP/IP Network Settings > Change Settings

IP=100.100.100.101

SUB=255.255.252.252

Gate=100.100.100.102

But that is not the preferred method

 

EIP needs to be enabled and configured

CWIS > Properties > General Setup > Extensible Services Setup

 

1.GIF

2.GIF

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau
Highlighted
Occasional Advisor
Occasional Advisor

Re: C70 with integrated fiery

What kind of Fiery is it? What are the first three digits of the Fiery serial number? What is the machine software level at?

0 Kudos