Cancel printing speed dial list on a 6121 MFP

[Joe Arseneau]

Typically you would cancel a job by hitting the cancel button (red one).

If that doesn't work reboot.

Since neither of the simple methods work, I'm not sure what is left.

I can't find a reference to this device having an NVRAM reset so that is out.

If it was unplugged for a year there is no chance the job is just stuck in RAM, so booting with the RAM out is not going to help.

I don't know the formatting of the hard drive or its contents so doing anything to that would be a bad idea.

And again, because it is still there after a year, there is no chance the job is just hanging out on the LAN waiting for the device so starting it with the NIC unplugged is also a no go.

I'd suggest calling Xerox, but if there is no maintenance agreement the cost versus the issue makes sitting there feeding through the paper jams is vastly cheaper even when accounting for your pay to do so.

[atleta]

That doesn't work. It has been unplugged for months before I tried to solve the issue again.

[Joe Arseneau]

Unplug it for 5 minutes.

[atleta]

  Hi,

I have a 6121 MFP and I have accidentally asked it to print the speed dial list (from the 'print fax reports' menu item). How do I cancel it? Turning on and off doesn't help. It was about a year or so ago and can't use the printer since then. The reason is that the paper feeding doesn't work too well, and it would take a lot of sitting by to have it finish the job. Also, a lot of wasted pages. And it just feels wrong not to be able to cancel whatever it is doing.

Any thought on this? I haven't found anything relevant in the manual when searching for 'cancel' and reading the part about the fax reports.

  Cheers,

    Istvan