Email is changed at the copier and not on the web page. Log into the copier itself as the admin and go to
Machine Status > Tools > System Settings > Scan/Fax Service Settings > Scan Defaults > Resolution
Sorry for not being clear, this rarely happens usual.
I search the default settings of a scan to e-mail.
I can not find where it is configured, and this is no place you have me for the indicated time [because i change to 600dpi and the scan is always a 200dpi (because I hurt certainnement made my request, sorry again)].
Can you help me please ?
thank you very much
No you cannot.
Workflow scan absolutely has a template, if you choose nothing on Workflow scan it is only because the Default template is already selected.Which is:
CWIS > Properties > Services > Network Scanning > Default template
If you are scanning to email, or Scan to PC, or Scan to Folder, or Scan to USB, which you did not state, then the same option is available, in a in a different place to set the default, in the same place to do it during a scan.
When looking for help from people you have never met, you need to be as clear as possible, especially for asking help on a device that has so very many ways to do a job.
Thanks for your reactivity.
It's mandatory to create a template for this ? Personnaly, i scan without the template ...
Select Advanced Settings > Resolution and change it
To change it by default go to the template in CWIS and change it there
I have a Xerox Color C60 and i want to change the resolution (DPI) of scan.
Anyone can tell me how i can do that please ?
Solved! Go to Solution.