Unfortunately you must replace the scanner.
So, it is a scanner issue. If both scan from DADF and glass (platen) have those lines, the scanner must be replaced (defective CIS). If the issue is present just from DADF clean well the little part of glass on the left.
prints from a computer look fine.
I've never seen a defect like that for scans. I have seen that for prints/copies. In those cases there was a label stuck in machine/glue from a label on the belt/drum
If prints from a computer look fine, or if internal pages print fine, I would call Xerox and put it up for service. It's free if it's under a year old. If it happens on internal prints, remove the print cartridge and see if you can find the label or replace the print cartridge/drum
Does this happen through feeder only or off the glass as well?
scratches on scanner and copy