cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

DP 700 Won't scan to server

When I scan to PC (Server) I get no single beep to indicate the process has finished. Also, there is nothing on the server from the Fiery remote scan. The press gets to the Transferring part of the process and times out at 0%. Cables are plugged in and we've reset both the server AND the Press.

 

The error code it gives is 016-576.

It's not in the manual though. The Fault page I printed says "Server connection error in FTP". What does this mean? The printer starts up fine and prints the test page with no troubles. This feature was working a few days ago.

 

Any help is Appreciated!

Thanks

0 Kudos
3 Replies
Highlighted
Valued Advisor
Valued Advisor

Re: DP 700 Won't scan to server

have you tried rebooting the machine and rip ?

 

have you applied all EFI patches?

0 Kudos
Highlighted
New Member
New Member

Re: DP 700 Won't scan to server

I'll apply the patches and let you know what I come up with. what do you mean by rip?

0 Kudos
Highlighted
Valued Advisor
Valued Advisor

Re: DP 700 Won't scan to server

the fiery controller :) you can power off that one seperatly , or restart if from the command workstation

0 Kudos