Erratic touch screen on Altalink 8055

[ngh38]

Hi Gabi

I have the same problem on 3 machines at the same time simeltoniuosly.. I changed the outlet plug.. turn off the lights and check all  plug/jacks ,also upgrade machine to 103 software version , but the problem did not solve..

do you have any idea regarding this matter recently?

[GabiE-Xerox]

Hi,

I had one machine with outlet power grounding issue. Moving it in another power source the issue was disappear.

Before that I replaced the touch screen and it's communication cable without success.

Also the artificial lighting (Flourescent light interference) in room may affect the functionality of the touch screen.

Another issue of this type of touch can be a bad connection in plug/jack's.

Gabi

[philip@iosltd.co.uk]

Hi

Having the same issues with same machine, erratic and frustrating, did you get around it ?

[m.bharani]

Altalink doesn't have touchscreen calibration and you may need to contact Xerox Support Centre.

[Reproman1984]

We have 3 machines doing this in two different locations, so I wouldn't think the power source would be the issue.

[Bharani]

It's a capacitive touch screen and the issue maybe because of your power source. Try with the different power source.

[Reproman1984]

We have an Altalink running the (current) latest version of software.

The button pushes on the touch screen are erratic, you can see the button going down and it makes the sound but it doesn't do anything.

Can the touch screen be calibrated?