cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Member
Member

FAX LAN WCM118I WINDOWS 7 64 BITS

Hello I need your help

I have a WCM118I in which we enable the PC fax, windows 7 64 bits, but can not findthe option, this model will be compatible with this operating system to perform that function

 

Thanks

0 Kudos
5 Replies
Highlighted
Valued Advisor
Valued Advisor

Re: FAX LAN WCM118I WINDOWS 7 64 BITS

what driver have used? whas it the one below? the m118 isnt supported anymore for 64 bit windows 7, there fore that driver was only intended for generic use...

 

what you can try is to install the global driver but not in basic mode but select a device in the options tab close to your machne , for example the 5225 series... then in the configuration tab , enable the fax option, then it will be visible in the preferences

but if its going to work.... its trial and error

 

 

http://www.support.xerox.com/support/workcentre-m118-m118i/file-download/enus.html?operatingSystem=w...

0 Kudos
Highlighted
Member
Member

Re: FAX LAN WCM118I WINDOWS 7 64 BITS

Thanks Fabio'll try and confirm you

0 Kudos
Highlighted
Agency Analyst
Agency Analyst

Re: FAX LAN WCM118I WINDOWS 7 64 BITS

Fabio, I do not think it will work and I haven't found a driver for older models for Windows 7.
Thank you,
Jordan R.
Systems Analyst / Consultant
Fiery Certified Professional

If someone helped you make sure you give Kudos for their efforts! Don't forget to Select Accept as Solution if the reply resolved your issue as it will be able to help others!
0 Kudos
Highlighted
Valued Advisor
Valued Advisor

Re: FAX LAN WCM118I WINDOWS 7 64 BITS

normally it should work with the global driver configured as for example an workcentre 128 or something... not just default, otherwise the driver will be in basic mode with no fax settings

0 Kudos
Highlighted
Member
Member

Re: FAX LAN WCM118I WINDOWS 7 64 BITS

Hi all, perform the tests, but unfortunately fails to send the fax, the global driver, if he shows me the fax option, but when the multi-send the job does it as a normal print.

We talked with the customer and switched to a multi-compatible (7120)



Thank you very much for the aid given,

0 Kudos