cancel
Showing results for 
Search instead for 
Did you mean: 
2 Replies
kaika313
Occasional Contributor
Occasional Contributor

Re: Fax remote receive code

Hello @TamyL-Xerox,

thank you for your reply.

I've found what I need at point 17 of the article:

  1. To receive a fax while using the external telephone after hearing a fax tone:
    1. Select [Remote Receive].
    2. Select [On].
    3. Enter a 2-digit tone code, and then select [OK].
    4. At the Restart System prompt, select [Close].

I couldn't change the 2-digit tone code, though...

Thank you

0 Kudos
TammyL-Xerox
Community Manager
Community Manager

Re: Fax remote receive code

Hello kaika313, 

Please take a look at this article on how to configure incoming and outgoing faxesIf you are still having issues after trying these steps, I suggest that you call into our support department for assistance @ 1-800-821-2797 or 1-800-835-6100 

Thanks,
TammyL-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!
kaika313
Occasional Contributor
Occasional Contributor

Fax remote receive code

Product Name: WorkCentre 6605
Operating System: Not Specified

Hi,

we've connected an external phone to the 6605 and would like to manually receive fax after hearing fax tones. Does the *9* code work also for this machine? If needed where is the option to change it?

Thank you

Regards

Kari

Tags (3)
0 Kudos