cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Xerox Analyst RuiKZ6N6K-xrx
Xerox Analyst

Re: How to connect workcenter 7425 to computer

Nice!

Connect the cable to the printer network port and to your pc.Next step is configuring the network.

- Set an IP address on your printer by following these steps:

How To Set up or Modify TCP/IP Settings (IP Address, Subnet Mask, Gateway Address) From the Control ...

On step 8 select auto

On step 11 select IPv4

On step 2 select Static

On step 5 enter: 192.168.0.5

On step 7 enter: 255.255.255.0

ignore step 8, 9, 10, 11

After step 16, stop

 

Next is how to set an ip on your PC, but for that I need to know what is your Operation System and version

 

Regards

Rui

 

 

Be sure to give out Kudos and select "Accept as Solution"
0 Kudos
Xerox Analyst RuiKZ6N6K-xrx
Xerox Analyst

Re: How to connect workcenter 7425 to computer

Assuming you have Windows 7, follow these steps:

http://blog.mclaughlinsoftware.com/2009/11/26/windows-7-static-ip/

 

On step 5 enter these settings:

IP: 192.168.0.6

Subnet: 255.255.255.0

ignore the rest

 

Now is time to test:

Go to Start and on the field type CMD and enter

A black windows should appear. Type this:

ping 192.168.0.5 and enter

you should get 4 replies something ike this:

 

Reply from from 192.168.0.5: bytes=32 time=1 ms TTL=46

Reply from from 192.168.0.5: bytes=32 time=1 ms TTL=46

Reply from from 192.168.0.5: bytes=32 time=1 ms TTL=46

Reply from from 192.168.0.5: bytes=32 time=1 ms TTL=46

 

If you get this you just completed the configuration of your network.

Let me know before we continue to the next step

 

Regards

Rui

Be sure to give out Kudos and select "Accept as Solution"
0 Kudos
Pwappers New Member
New Member

Re: How to connect workcenter 7425 to computer

Any way you could update this for windows 10?  I have inherited a WorkCentre 7435 but where I am placing it is far from the cable modems and of course it doesn't have wifi.  Can I use this method to connect it to the internet via a computer?

0 Kudos