How to turn off sound when copying altalink 8035c

[Testperson_1]

Hello Gabi,

thank you very much! :)

I'll try that now!

Best regards

Daggy

[GabiE-Xerox]

Hi,

Configuring the Sounds at the Control Panel
To configure the sounds at the control panel:
1. At the control panel touch screen, touch Device, then touch Tools.
2. Touch Device Settings→General→Sounds.
3. For Enable Sounds, select the toggle button.
Note: A check mark on the toggle button indicates Enabled.
4. To adjust the sound volume for an event, move the appropriate volume slider control as needed.
5. Touch OK.

Configuring Sounds in the Embedded Web Server
To configure sounds in the Embedded Web Server:
1. In the Embedded Web Server, click Properties→General Setup→Status LED & Sounds.
2. To enable sounds, select Enable Sounds.
3. To adjust the sound volume for an event, move the appropriate volume slider control as needed.
4. Click Apply.

Gabi

[Testperson_1]

Dear all,

can someone tell me how we can turn off the sound while copying?

Thank you