Ok, never mind. Found it in the ScanningPatch_ConnectKey_English.pdf -> to look for LL appended to the Network controller software.
Sorry about the posting before fully reading the manual ;)
We just purchased a 7830 and installed it today. I downloaded and installed the Scanner Patch. How can I tell (by firmware version or otherwise) that the patch was successfully applied? Is there anything in the web interface that would tell me?
Having the latest spar is not a prerequisite.
What version do you have? You should have the latest general release v061.121.222.06508.
Make sure the file is unzipped. If it still wont load then have a tech come out.
To build on what Rick said in his message...
We have many engineers that are interested in your experiences, good or bad, with the LL patch. Most importantly, we want to make the bad ones better as soon as possible, so if you can please let us know...
we'll work with you to get you back in production.
For those of you that want to share your good experiences, that would be helpful for us, as well.
Thanks in advance,
We have many dedicated Xerox people behind the scenes working hard to make the LL patch successful and we welcome your feedback. We'll be keeping an eye on this forum and helping out as needed. Let us know how it is going.