cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

Orientation switch and prints half size when copying and printing Xerox WorkCentre 3315

I have a new Xerox WorkCentre 3315.  It worked fine for a day, now whenever I try to print or copy it comes out with the orientation switched and printing half size.  It does it on both bypass and from the sheet feeder.  I have reset all settings.  Any ideas?

0 Kudos
1 Reply
Highlighted
Community Manager
Community Manager

Re: Orientation switch and prints half size when copying and printing Xerox WorkCentre 3315

Hi Curtiosity,

Thank you for using the Support Forum. Please take a look at the solution for setting the orientation in the print driver.  Make sure that the orientation is set the same as the driver in the document that you are printing. If this does not help please consider contacting your support centre for further assistance.

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

0 Kudos