Thank you for your help but, unfortunately, still not working. I was following the instructions for multi-send and I still have the same issue. I tried turning off the machine and unplugged it as well and it did not solve the problem either. I will contact the support centre next.
Thank you for using the Support Forum. Please make sure that you are following the instructions for doing a muti-send. If you do not use the multi send function you will not be able to continue to add numbers. If you are using the multi-send feature and you can only add two numbers then please power off the machine for 30 seconds and then turn it back on and try again. if the problem continues please consider contacting your support centre for further assistance.
I've done my best to search for this solution on my own but I've not found anyone with this issue so here we go.
PREVIOUSLY, when you went to broadcast on the 3300, the options were as followed:
NOW, when you go to broadcast it does this:
This is a major inconvenience because I broadcast to multiple numbers several times per day. I've lived with it but if I am not at work the person covering my job states she would not have the time to send each fax individually.
This started about three months ago.