Scan to email

[MRCAnalyst]

Change your primary network setting to Wireless instead of Ethernet and your scans should work over WiFi. Outgoing communications only go over the Primary Network while both the primary and secondary networks will accept incoming connections (concurrent connectivity).

[Pickle.]

Current settings are as follows:

Host Name:

XC-B8D5A2

Primary Network

 Ethernet

IP Mode:

 Dual Stack

IPv6 Priority over IPv4 at Domain Name Resolution:

 On

Edit

IPv4

Mode:

 DHCP with Auto IP

IP Address:

0.0.0.0

Subnet Mask:

0.0.0.0

Gateway Address:

Release IP:

 Off

Edit

IPv6

Link-Local Address:

DHCPv6:

 Configuration Data

Edit

DNS

Domain Name:

Connection Timeout:

 1 Seconds

IPv4 DNS Servers

DHCP:

 On

IPv6 DNS Servers

DHCPv6-lite:

 On

Generate Domain Search List Automatically:

 On

Edit

802.1X

802.1X:

 On

Authentication Method:

 EAP-MD5

Certificate Verification:

 Off

User Name (Device Name):

 Printer

Edit

[Pickle.]

Hi All,

I have just purchased a 6515DNI and am having some trouble setting up the scan to email function. The next step after that will be scan to file.

With ethenet cable connected it works, scans and send ok.

Without ethenet using wireless connection it does not work, scans ok but will not send.

My guess is something in the DNS or similar is not set correctly.

Any ideas or instructions would be appreiciated.

Regards,