cancel
Showing results for 
Search instead for 
Did you mean: 
datap New Member
New Member

Scan to network folder using FTP cannot enter password for user

Jump to solution

I have setup a user to scan to a network folder in the address book and I have pasted it below.  I have it working but the only way I could enter the "password" for the user Scanner was actually on the machine itself and I could not find a way to do it using the web interface.  Is this the only way I can enter the password for the FTP server on the Xerox WorkCentre 5325? 

 

This is a new device for us and the company that provided it said this is the way we had to scan to a network folder.  Create an address book entry with the FTP ip address along with the path and user name for authentication (see picture below) and then to actually input the password for that address book entry we had to enter it on the device itself and could not use the web interface.  We had to do this for each folder we wanted to scan too.  We have it working but I wanted to know if there was a better way.

 

Here are the software versions installed on the Xerox.

Configuration

SystemVersion 53.32.23
Controller ROMVersion 1.205.146
IOT ROMVersion 40.2.0
Finisher A ROMVersion 15.3.0
ADF ROMVersion 7.10.0
Fax ROMVersion 1.1.14
SJFIVersion 3.0.18
SSMIVersion 1.16.0

 

 

 

Capture.JPG

0 Kudos
2 Replies
Analyst Nation Moderator Joe053204-xrx
Analyst Nation Moderator

Re: Scan to network folder using FTP cannot enter password for user

Jump to solution

You need to enable the HTTPs option to be able to enter a password in the address book.

It is intentionally done so that the transfer is not done with no security (plaintext)

 

You may need to create a self signed certificate first

2.JPG

 

Once that is done, or if it already was, go ahead and enable the HTTPs

 

1.JPG

 

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe.
0 Kudos
Highlighted
datap New Member
New Member

Re: Scan to network folder using FTP cannot enter password for user

Jump to solution

That worked great.  Thank you.  I knew there had to be a way.  

 

 

0 Kudos