Thank you so much.
All got it working now.
Sorry, I have nothing more, if DNS is setup and correct, it certainly should not be stating that it isn't set up, and I have never come across any device that had a bug like that.
If you are setting up GMAIL and the primary DNS is set as 220.127.116.11 then the only way(s) for it to fail is if
1. The gateway is wrong so it can't get to 18.104.22.168
As for setup, with exception to the SMTP server, all the big ones are pretty near identical. So GMAIL is exactly the following
The only change for Office 365 is changing the SMTP server from smtp.gmail.com to smtp.office365.com and of course an email from that service to use. But STARTTLS, port 587 is the defacto standard at this point.
There is a bug in older firmware where Office365 could fail unless you disabled IPv6 (see below), so if you are not on a spar firmware, you may want to update it, or try this:
And change Dual Stack to IPv4
Thanks for your help, but I'm still getting the same error.
I've downloaded the User and Admin guides but they arne't much help.
Do you know a good, easy to read, guide for setting the Versalink up, as I may of missed something else?
You have not setup DNS in the TCP/IP settings of the printer, so it can't resolve the server that is smtp.gmail.com in order to communicate with it.
EWS > Connectivity > Ethernet and then Edit the DNS section
If you don't know what the DNS servers are, a typically safe bet is to use the Gateway address as the Primary Server and 22.214.171.124 as the secondary
I've read through a few posts here, and else where, but am still having trouble setting up the scanning. I've tried using Hotmail and Gmail but it won't scan.
The error sheet gives the result:
Completed with an Error (016-772): DNS server un-sets up in SMTP.
If anyone could help with what I need to change in the email settings that would be great.
Solved! Go to Solution.