POOR PICTURE RESOLUTION..... the share file i cant find by adding my pc adrees in network
Please provide actual information, you state it has poor resolution and that you can't find it, the 2 sentences cannot go together.
I try to get the shares files and do procedure in start menu as stated but it won't work when i put PC ip adress to find shares files as stated
i try to zoom on the pictures showed but it is not good quality.
my Pc adress is 192.168.0.113 and the xerox ip is 192.168.0.164 wich one do i use??? to find shares files for permission
http://forum.support.xerox.com/t5/Copying-Faxing-Scanning/Scan-To-Pc-Smart-Tools-3-0/td-p/179580
Take a look at this link, it should work for you.
I have followed everything to a T, and it still will not connect to scan. I did notice that when I add a contact there is no place for a password?
Since you had no password field it could not be expected to work.
To get the password field you need to enable HTTPS
Or you could also update to the latest firmware which should give you the password field without implementing HTTPs
Hi, what if i don't have a scans once i do these steps? Users is there but scans is not.
I followed all this and it still didn't work for me.
I was getting error 018-505
What finally worked for me was putting a password onto the pc then entering the password details in the SMB page. Hurrah, only took me 12 hours. It clearly says that if you don't use a password you can leave this blank but that didn't work for me.
Also had to manually search for a windows update to get my laptop to connect.
Great machine now it's going though.
when it tries to "browse SMB" it waits a few seconds then comes up with the error "unexpected communications error, cannot browse at this time"
I've tried it on normal ethernet link and wifi, but the same result
printing is fine.