Unable to scan via SMB - scanning to network drive xerox 3635

[WayneCSmith]

add the domain to the user name like: MYDOMAINNAME\USER.NAME...

[mohammed_k]

dear lasasso 

Try to configure like that if you using network drive . 

IP Address and Port: . . . : actual IP of our lenovo server
Share: Common
Document Path: Scans 
Login Name: ip address of your network drive IP \your login    Note :  is Must to be admin user or have full access right on the network drive 

Password: our password
Retype password: same

Anytime I scan, on the printer it says transfer... then delete.

On the scan to file comfirmation report, on the Job status, it says "Status...... Failed

Please help.

[MSPTestAccount]

Hi lasasso.

Thank you for using the forum.

It looks like your file path has a formatting issue: You cannot start the path with a special character, such as a / - you’ll need to start the file path with the subfolder beneath the shared directory. It should read something like this:

IP Address and Port:   Server address

Share: Common

Document Path: Scans

Login Name: login username

Password: account password

Retype password: same as above

If you have any additional concerns after making this change, I recommend you call into support - 1-800-835-6100.

[lasasso]

Hello.

I have not been able to scan to network drive and cannot figure out how to set it.

Here is the setting I am using

IP Address and Port: . . . : actual IP of our lenovo server
Share: Common
Document Path: \Scans 
Login Name: our login
Password: our password
Retype password: same

Anytime I scan, on the printer it says transfer... then delete.

On the scan to file comfirmation report, on the Job status, it says "Status...... Failed

Please help.