The NVM parameters are available just for the techs in Diagnostic Mode.
How can I change NVM parameters? Where is the list? Thank you.
thank you, it worked!
normally if you change the machine language , fax reports are also printed in that language
although there seems to be a bug pressent, that doesnt change the NVM value
it can be fixed by changing the NVM manually :
NVM Location 200-044
Set 200-044 to:
0 = FrenchCanadian
1 = English
2 = Danish
3 = Swedish
4 = InternationalSpanish
5 = German
6 = Italian
7 = USEnglish
8 = Dutch
9 = Portuguese
10 = Norwegian
11 = Finnish
12 = French
13 = Brazilian
14 = Greek
15 = Czech
16 = Polish
17 = Hungarian,
18 = Romanian
19 = Turkish
20 = Russian
21 = SimplifiedChinese,
22 = TraditonalChinese
23 = Korean
24 = Japanese
25 = Catalan
I tried your suggestion but it didn't work!
At this point we will call Xerox and ask if a technician would come and try to fix this...
I retracted my previous statement, it was incorrect. (But left it as a reminder of the time I was wrong on the internet)
I don't know the answer to your question though, so it is probably still a service tech matter with NVM settings if it is indeed just on fax reports.
If you select the physical button that says Language to the right of the touch screen, it will do as stated above...
<login to the copier as admin> and go to Machine Status > Tools > Device Settings > General > Language / Keyboard Selection and change it there, even though it is the identical screen, it will apply to everything system wide except the built in webpage.
But if yours is all in one language including the configuration report, yet the fax confirm is in another, then it would be a tech because something is broken
The UI language is the only thing you can change at the device. The internal Webpage (CWIS) and every report (Fax confirm, print banner, error sheets, Configuration report) use the System language, which is set via an NVM, so a tech needs to do it.
is it possible to change FAX confirmation report language on a WorkCentre 7835?
A tecnician had to reload the whole software and after that we upgraded it to the latest firmware available.
The problem is that the machine prints FAX confirmation report in english instead of the current ui language.
Is this a known issue? Is it possible to change it?
Solved! Go to Solution.