Disable all scanning except workflow scanning then setup scan to home and network authentication.
User goes to machine , selects Workflow Scanning and the only template would be the Scan to home template that goes to their home directory per the LDAP settings.
1. You covered any relevant data with exception to what appears to be a Document path starting with a \ so the only thing I see is something wrong already (Do not start anything with a \ or / ) And you are using a Hostname, and Connectkey printers can't do that unless registered on the domain (Must be DHCP) so it is very unlikely you can get it to work without starting over and using templates.
2. And the Prompt at interface is right here
But it appears you are also trying to do this with Scan To in the addressbook and not following anything at all in this thread you jumped into, so you won't have the option at all.
Then set it to Prompt at user interface instead of System
You have to do the username and password though, no way to just do the password.
Hello, I have a WorkCentre 7835 in our office, and I'm currently trying to get a similar setup as described on the original post. I want the users to be able to scan to their personal folder /server/share/username with the difference that I want the user to type in their domain password to complete the scan. I don't want to store the domain password on the device for security reasons. I tried leaving the password field blank and I get "Access Denied" when I try to scan. Thank you for your help.
Put folder on root of C:\ drive, right-click and choose Properties
Select Sharing > Share and add the user account the printer will be using and change the dropdown for that account to Read/Write
Click Share > Done <If you want scans to go to the desktop, right-click the folder and select Send to > Desktop (Create shortcut) >
Now select Advanced Sharing > Permissions > Add and add the same account as above,< highlight the user and take note of the username format within the brackets, that is exactly how the login name will be entered in the printers scan setup>,then check the box for Full Control > Apply > OK > OK > Close
Then, to set up a template on the printer go to CWIS > Scan > Create New Template and fill it in
Things to note:
If the username in use does not have a password, I highly suggest making an account that does on the PC, Windows is fine when you don't have a password, but it is not typically fine when you are running a modified Linux (The printer) and accessing the Windows PC across a LAN connection as opposed to physically.
If you don't know your PC's IP address, click on the start menu and type cmd and hit enter
In the new window type ipconfig and hit the enter key.
you need the ipv4 address in amongst all the shown data.
If you are on the latest firmware, and still failing, it is likely that it can't in fact scan to Windows 10 as it very likely cannot do SMBv3. If that is the case, after all above is completed, you would need to change Windows 10 to work with SMBv1
Hello I have also issue with my Xerox 7225i.
I want to scan with SMB i check parameters but any time i want to scan i get a error message. "Login Failure. Check user password and/or setup. I check the documentation you sent " http://www.support.xerox.com/support/workcentre-7220-7225/support/enus.html?objGUID=15382 " i'm usibng a rooter and The printer Have static IP adress.
I want to know what wich user name and password i have to write ?
I try user name and password of my computer but nothing.
Please need you help.
I would like to do the same thing but for Fax and not Scan
1. I would like to receive all fax in one shared folder
2. I would like that users can use the printer to send fax from theyr computer, no need to go to the printer in order to send a fax.
My Xerox is 7830 Workcenter.