cancel
Showing results for 
Search instead for 
Did you mean: 

Re: XC1255 Streaks

Jump to solution

Rui: I sincerely appreciate your help, however, I'm having a hard time understanding your suggestions...I'm sorry. . You said "The Simpson indicates....." Did you mean to say "The Symptom indicates......." You said "I sow that you....." Did you mean to say "I show that you...." You said "Is this printer using one lamp or two lamps? One for the ADF and the other for the platen?" Since this is a copier I assume you meant to say "Is this copier using one lamp or two lamps?" If so, how would I find out on my XC1255 model if it uses 1 lamp or two? When you say to "check the paper path on the ADF..." Is that the same as SDF, which is what my manual calls the top loading document feeder? If so, what is the procedure for checking the ADF, since it seems to be self contained? I'm having a difficult time understanding your last suggestion to "check on the glass if the paper has the same distance from the glass on all lengths of the glass/lamp." Do you mean that I should check to see if the document feeder (ADF) is feeding the paper across the glass properly? How would I do that while it is feeding the paper? If that is not what you are suggesting, please explain further. Rui I want you to know that I really do appreciate your taking the time to help me. I'm sorry that I'm having a hard time understanding your written suggestions.

0 Kudos
RuiKZ6N6K-xrx
Xerox Analyst
Xerox Analyst

Re: XC1255 Streaks

Jump to solution

Hi,

The symptom indicates that the problem only can be on the scanner. I red that you already cleaned both classes. Is this copier using one lamp or two lamps? One for ADF and other for the platen? If uses two then the lamp is the problem.

I'm remember other thing, check the paper path on the ADF and check on the glass if the paper has the same distance from the glass on all length of the glass/lamp. Not sure if I could explain this right, sorry.

Regards

Rui

Be sure to give out Kudos and select "Accept as Solution"
0 Kudos

Re: XC1255 Streaks

Jump to solution

Thanks for the reply however, as noted in my message, I have pretty much done all those suggestions. What I would like to know is what specific part is causing the problem. I'm very technically savvy and can probably fix the issue if I am pointed in the right direction. I contacted the Support center and was of no assistance. Since it is long out of warranty, I would like to give it a try first before hauling it in to a repair shop. Can you provide me with information on how to repair this, including any part numbers diagrams, etc.? Thanks for your help.

0 Kudos
CherylO-Xerox
Valued Advisor
Valued Advisor

Re: XC1255 Streaks

Jump to solution

Hi bigdawg1,

Thank you for using the Support Forum. Please take a look at this solution for how to clear black lines and see if any of the solutions will help you.  If these solutions do not help please consider contacting your support centre for further assistance.

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

0 Kudos

XC1255 Streaks

Jump to solution
Product Name: Other - specify product in post
My XC1255 has developed a light black streak along the right edge of the paper, only if I feed the copy through the document feeder. If I place the copy directly on the glass, the copies come out clean and crisp. I have emptied the overflow toner compartment, cleaned both scanner glass, cleaned the Mylar strip and mirror as well as the corona. Any suggestions what I should try next?
0 Kudos