Showing results for 
Search instead for 
Did you mean: 
1 Reply
Joe Arseneau
Valued Advisor
Valued Advisor

Re: XEROX WorkCentre 7835 Workflow Scanning

Assuming SMB, change the protocol dropdown to SMB

Friendly name is unimportant, call it Server

Input the IP address:Port as

Document path is shared drive\PRINTER - SCAN


I will note that the machine did not support server 2012 originally and would give Login failures with the correct info (This was due to the SMB3 that is used Server side)


So if your current firmware starts with 072, and you are getting login errors, try updating to the latest firmware (no settings will be lost)


If it starts with 071, not only is it not going to work, but you would need a tech to do a Forced ALTBOOT no data backup no clone to get it up to current. Which means the device will be wiped of literally every setting on it, no clones can be made, it would require you to reinput anything on it beyond the IP address (Tech puts that back on to confirm connectivity)

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau
0 Kudos
New Member
New Member

XEROX WorkCentre 7835 Workflow Scanning

Product Name: Other - specify product in post

I want to save scanned files to a folder on my server (running Windows server 2012 r2)


Here is the information how to access that folder:

Address:\shared drive\PRINTER - SCAN

domain name is:

User that have access to that folder:

username: printer_user

password: ThisIsATestPassword12345


What do I have to put in these fileds (see picture below), is there other setting that I also need to setup other than this?


Open picture in new tab 



Thank you!


Any if you are about to reply and tell me "please follow some articles, tutorials etc..." from user manual or some KB please don't, I couldn't understand any of those that's why I am here.


0 Kudos