cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
mina.ed New Member
New Member

Xerox 5775 SMB Workflow Scanning

Jump to solution

Hello,

 

I'm  an IT Engineer, and I have problem configuring Workflow Scanning on Xerox 5775 Work Center.

 

Error was : "Login Failure, Check User password, and/or setups "

 

I made an account on the Server and created a password for it and I Gave it Full Control on the server

 

in the server name, I put "server IP" , and in the user I put "scan" the user name on the server.

 

Please don't hesitate to ask me if you need more information about the setup.

Tags (2)
0 Kudos
3 Replies
Analyst Nation Moderator Joe053204-xrx
Analyst Nation Moderator

Re: Xerox 5775 SMB Workflow Scanning

Jump to solution

1. You have to get the port right (It's 445, not 139, on any current OS)

2. You have to specify the actual folder that it goes into (Assuming SMB)

3. And you have to also format the username properly, which is simple to find on the share itself.

1.JPG

 

The username formatting is taken from here specifically

 

win10SMB.GIF

 

 

If it still fails after that is confirmed/done, you would need to update the firmware, which you can grab here

 

And if it still fails after that, you will probably need to give up on SMB and switch to FTP, because the 57XX MFP doesn't support SMB2 or SMB3.

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe.
0 Kudos
mina.ed New Member
New Member

Re: Xerox 5775 SMB Workflow Scanning

Jump to solution

alright, will try the adjustments and feed you back

0 Kudos
mina.ed New Member
New Member

Re: Xerox 5775 SMB Workflow Scanning

Jump to solution

Alright I found the problem, I had to put the user in " Access Control Assistance Operators" group in AD Users and Computers, and the 445 Port also solved the issue

0 Kudos