Xerox 7435 scan using build a job.

[Lheitstu]

Thank you for the information, I had already set the user's template to scan the mixed sizes it is the build a job feature that we needed.  If we had that we could then use the xerox to rather than a 3rd party program to get our documents into our electronic records system.

Thank you for your help though!

[CherylO-Xerox]

Hi and Thanks for using the Customer Support Forum.  You may not need the job assembly to scan mixed size originals.  Please look at the following solution from our online support and see if modifying the template to scan mixed size will work for what you are doing.  Here is the link http://www.support.xerox.com/support/WC7425_WC7428_WC7435/support/en_US.html?objGUID=18662

I hope this helps,

CherylO-Xerox

[Fabio]

if its not there, then its not there i am afraid :(

[Lheitstu]

I would like to use our 7435 to scan multiple sized pages however, under network scanning the job assembly tab is not there. It shows under the copy feature, but that does not do me any good.  Could someone provide instructions on how to get that tab available so I could use this feature.

Thanks so much for any assistance you can provide.